Kangoo.plSzukamy produktów wśród ponad 10 mln ofert sklepów internetowych

With the new graphics card water block series, Alphacool combines the advantages of developement and research in Germany with affordable production in China. Years of experience in research of developement at Alphacool reflect in high-quality and well-designed water blocks. And the results are spectacular:   Weight: An optimized cooling plate and top structure allowed weight savings of approximately 200 grams, resulting in a 757g leightweight.   Channel structure: Despite the low weight, all relevant heat zones on the graphics card are covered and cooled by the water block. In the chip area, the cooling plate features a channel structure with a remaining thickness of less than 1mm and channels only 0.8mm in width. This allows extreme cooling performance for even the most extreme overclocking.   Flow: Channel- and cooling structure were optimized to achieve maximum flow rates   Material: Highly thermally conductive copper  of high purity is used for the cooling plate, achieving the best possible heat transfer from graphics card to coolant   Compatibility: Thanks to the low depth of only 6mm, conflicts with neighbouring expansion- or graphics cards are a thing of the past. Maximum compatibility for Multi-GPU systems means maximum performance paired with perfect cooling!   SLI ready: With four connection threads, multiple graphics card water blocks can be connected directly with SLI connectors   Design: Alphacool took a new approach to the appearance of this new water block series: Stainless steel top plates in five different finishes give an individual touch to your system. The water block is available in the following finishes: black (brushed / polished), silver (brushed / polished) and polished copper.   Included with this water block are mounting screws as well as thermal pads and -compound. A multi-lingual (German, English, French) mounting manual and tools allow quick and easy installation of the water block.   And the best at the end:  The water block is shipped in vacuum packaging. This allows our customers to be sure that the water block is fresh from the factory and not stained from storage. Another great thing about the new series are the many different availabe versions. The layout of the water block is as shown in the image gallery. Despite that we strongly recommend to hold up the water block against the graphics card before removing the protective film to ensure compatibility. Should the water block actually not fit, you can return the water block to us and will, if the vacuum packaging is unopened, receive a 100% refund!   Technical specifications:  Material: Copper, stainless steel  Dimensions (LxWxH): 190 x 124 x 6 mm (17mm at the fitting area and 9.5mm at the bridge)  Weight: Approx. 970g  Connection threads: 4x G1/4" completely SLI/Crossfire capable  Compatible with ATI 7950 und 7970 V2 graphics cards in reference layout   Extent of delivery:  1x Water block  Thermal pads  Thermal compound  Mounting material  2x G1/4" screw plugs 

With the new graphics card water block series, Alphacool combines the advantages of developement and research in Germany with affordable production in China. Years of experience in research of developement at Alphacool reflect in high-quality and well-designed water blocks. And the results are spectacular:   Weight: An optimized cooling plate and top structure allowed weight savings of approximately 200 grams, resulting in a 875g leightweight.   Channel structure: Despite the low weight, all relevant heat zones on the graphics card are covered and cooled by the water block. In the chip area, the cooling plate features a channel structure with a remaining thickness of less than 1mm and channels only 0.8mm in width. This allows extreme cooling performance for even the most extreme overclocking.   Flow: Channel- and cooling structure were optimized to achieve maximum flow rates   Material: Highly thermally conductive copper  of high purity is used for the cooling plate, achieving the best possible heat transfer from graphics card to coolant   Compatibility: Thanks to the low depth of only 6mm, conflicts with neighbouring expansion- or graphics cards are a thing of the past. Maximum compatibility for Multi-GPU systems means maximum performance paired with perfect cooling!   SLI ready: With four connection threads, multiple graphics card water blocks can be connected directly with SLI connectors   Design: Alphacool took a new approach to the appearance of this new water block series: Stainless steel top plates in five different finishes give an individual touch to your system. The water block is available in the following finishes: black (brushed / polished), silver (brushed / polished) and polished copper.   Included with this water block are mounting screws as well as thermal pads and -compound. A multi-lingual (German, English, French) mounting manual and tools allow quick and easy installation of the water block.   And the best at the end:  The water block is shipped in vacuum packaging. This allows our customers to be sure that the water block is fresh from the factory and not stained from storage. Another great thing about the new series are the many different availabe versions. The layout of the water block is as shown in the image gallery. Despite that we strongly recommend to hold up the water block against the graphics card before removing the protective film to ensure compatibility. Should the water block actually not fit, you can return the water block to us and will, if the vacuum packaging is unopened, receive a 100% refund!   Technical specifications:  Material: Copper, stainless steel  Dimensions (LxWxH): 139 x 124 x 7mm (17mm at the fitting area)  Weight: Approx. 875g  Connection threads: 4x G1/4" completely SLI/Crossfire capable  Compatible with Nvidia GTX670 graphics cards in reference layout   Extent of delivery:  1x Water block  Thermal pads  Thermal compound  Mounting material  2x G1/4" screw plugs

The new Alphacool NexXxos radiators, a name that stands for experience and quality has come to bring a fresh breeze to the radiator market. Every user of a water cooling system needs a radiator and everyone has different requirements towards the heat exchanger. Of course the customer always demands the best in its class. The Alphacool NexXxos radiators have come to compete with and to beat the best in their class and to be the best radiator in all sizes. No more endless choices without a clear class leader, the Alphacool NexXxos is the one tool for all your needs! Alphacool has been the company to introduce new developments and improvements in the radiator and water cooling sector generally many times over the last years. Following this tradition, the new NexXxos radiators are the first to truly deserve the “Full copper” attribute. All main parts, not only the fins and channels, but the chambers are also made from copper. This brings an improvement in performance where other radiators are left without a chance. The material already gives an advantage over the competition and the inner structure is up to par with the competition. Separated chambers give the coolant a clear direction, allowing high flow rates which improve the performance of the whole cooling loop. Flat chambers on the heat exchanger increase mounting flexibility thanks to the reduced overall length. Versatile and easy mounting is one of the main points, on which the research and development department at Alphacool focused. The chamber offers three possibilities for fitting installation on both inlet and outlet (not on the NexXos ST30). Less angled fittings are needed, improving flow rates and offering more mounting possibilities. Hence the radiator can even be installed in tight enclosures, where otherwise internal installation is not a possibility. A 1/4" screw plug allows easy de-aeration of the radiator (on all UT60 and NexXxos Monsta) and hassle-free vertical installation of the heat exchanger. The threaded opening can even be used for filling, e.g. in combination with a Fillport. Versatility is the essence of the new NexXxos series! The radiators are designed to be used with 120mm as well as 140mm fans and are available in different thicknesses. The choice of 30mm, 45mm and 60mm offers the perfect radiator for every purpose. Even mounting and installation of fans and radiator grills is easy and versatile with these radiators: The M3 threads are standard in the radiator sector and available in all lengths at an affordable price. Even the dreaded insertion of a screw too far into the radiator does not result in expensive damage. Unlike other radiators, the NexXxos series is equipped with an internal protective ledge which stops the screw before it damages the fins. Fin spacing is always an important factor in radiator design. The new series from Alphacool has a fin design which allows it to perform extremely well even with slow-spinning and medium-speed fans. This is not only pleasant thanks to the fact that it avoids unnecessary noise; it also means that the choice of fans that can be used with these radiators is not restricted. These radiators are the result of experience and powerful performance meeting future-oriented design and well-thought through solutions. Alphacool NexXxos radiators: The one tool for all your cooling needs! Technical specifications: Material internal: Mostly copper  Material casing: Side panels steel, threads brass, copper chambers Colour: Black Dimensions (LxWxH):324x144x46mm Connection threads: 6x1/4“ Mounting thread size: M3 Pressure tested: 1.5bar Weight:1413g Extent of delivery: 1x Radiator 5x Copper-plated screw plug 8x Copper-plated M3x30mm hexagon socket screw 8x Copper-plated M3x35mm hexagon socket screw

The new Alphacool NexXxos radiators, a name that stands for experience and quality has come to bring a fresh breeze to the radiator market. Every user of a water cooling system needs a radiator and everyone has different requirements towards the heat exchanger. Of course the customer always demands the best in its class. The Alphacool NexXxos radiators have come to compete with and to beat the best in their class and to be the best radiator in all sizes. No more endless choices without a clear class leader, the Alphacool NexXxos is the one tool for all your needs! Alphacool has been the company to introduce new developments and improvements in the radiator and water cooling sector generally many times over the last years. Following this tradition, the new NexXxos radiators are the first to truly deserve the “Full copper” attribute. All main parts, not only the fins and channels, but the chambers are also made from copper. This brings an improvement in performance where other radiators are left without a chance. The material already gives an advantage over the competition and the inner structure is up to par with the competition. Separated chambers give the coolant a clear direction, allowing high flow rates which improve the performance of the whole cooling loop. Flat chambers on the heat exchanger increase mounting flexibility thanks to the reduced overall length. Versatile and easy mounting is one of the main points, on which the research and development department at Alphacool focused. The chamber offers three possibilities for fitting installation on both inlet and outlet (not on the NexXos ST30). Less angled fittings are needed, improving flow rates and offering more mounting possibilities. Hence the radiator can even be installed in tight enclosures, where otherwise internal installation is not a possibility. A 1/4" screw plug allows easy de-aeration of the radiator (on all UT60 and NexXxos Monsta) and hassle-free vertical installation of the heat exchanger. The threaded opening can even be used for filling, e.g. in combination with a Fillport. Versatility is the essence of the new NexXxos series! The radiators are designed to be used with 120mm as well as 140mm fans and are available in different thicknesses. The choice of 30mm, 45mm and 60mm offers the perfect radiator for every purpose. Even mounting and installation of fans and radiator grills is easy and versatile with these radiators: The M3 threads are standard in the radiator sector and available in all lengths at an affordable price. Even the dreaded insertion of a screw too far into the radiator does not result in expensive damage. Unlike other radiators, the NexXxos series is equipped with an internal protective ledge which stops the screw before it damages the fins. Fin spacing is always an important factor in radiator design. The new series from Alphacool has a fin design which allows it to perform extremely well even with slow-spinning and medium-speed fans. This is not only pleasant thanks to the fact that it avoids unnecessary noise; it also means that the choice of fans that can be used with these radiators is not restricted. These radiators are the result of experience and powerful performance meeting future-oriented design and well-thought through solutions. Alphacool NexXxos radiators: The one tool for all your cooling needs! Technical specifications: Material internal: Mostly copper Material casing: Side panels steel, threads brass, copper chambers Colour: Black Dimensions (LxWxH): 223 x 182 x 45mm Connection threads: 6x1/4“ Mounting thread size: M3 Pressure tested: 1.5bar Weight:1,058kg Extent of delivery: 1x Radiator 4x Copper-plated M3x30mm hexagon socket screw 4x Copper-plated M3x35mm hexagon socket screw

The new Alphacool NexXxos radiators, a name that stands for experience and quality has come to bring a fresh breeze to the radiator market. Every user of a water cooling system needs a radiator and everyone has different requirements towards the heat exchanger. Of course the customer always demands the best in its class. The Alphacool NexXxos radiators have come to compete with and to beat the best in their class and to be the best radiator in all sizes. No more endless choices without a clear class leader, the Alphacool NexXxos is the one tool for all your needs! Alphacool has been the company to introduce new developments and improvements in the radiator and water cooling sector generally many times over the last years. Following this tradition, the new NexXxos radiators are the first to truly deserve the “Full copper” attribute. All main parts, not only the fins and channels, but the chambers are also made from copper. This brings an improvement in performance where other radiators are left without a chance. The material already gives an advantage over the competition and the inner structure is up to par with the competition. Separated chambers give the coolant a clear direction, allowing high flow rates which improve the performance of the whole cooling loop. Flat chambers on the heat exchanger increase mounting flexibility thanks to the reduced overall length. Versatile and easy mounting is one of the main points, on which the research and development department at Alphacool focused. The chamber offers three possibilities for fitting installation on both inlet and outlet (not on the NexXos ST30). Less angled fittings are needed, improving flow rates and offering more mounting possibilities. Hence the radiator can even be installed in tight enclosures, where otherwise internal installation is not a possibility. A 1/4" screw plug allows easy de-aeration of the radiator (on all UT60 and NexXxos Monsta) and hassle-free vertical installation of the heat exchanger. The threaded opening can even be used for filling, e.g. in combination with a Fillport. Versatility is the essence of the new NexXxos series! The radiators are designed to be used with 120mm as well as 140mm fans and are available in different thicknesses. The choice of 30mm, 45mm and 60mm offers the perfect radiator for every purpose. Even mounting and installation of fans and radiator grills is easy and versatile with these radiators: The M3 threads are standard in the radiator sector and available in all lengths at an affordable price. Even the dreaded insertion of a screw too far into the radiator does not result in expensive damage. Unlike other radiators, the NexXxos series is equipped with an internal protective ledge which stops the screw before it damages the fins. Fin spacing is always an important factor in radiator design. The new series from Alphacool has a fin design which allows it to perform extremely well even with slow-spinning and medium-speed fans. This is not only pleasant thanks to the fact that it avoids unnecessary noise; it also means that the choice of fans that can be used with these radiators is not restricted. These radiators are the result of experience and powerful performance meeting future-oriented design and well-thought through solutions. Alphacool NexXxos radiators: The one tool for all your cooling needs! Technical specifications: Material internal: Mostly copper Material casing: Side panels steel, threads brass, copper chambers Colour: Black Dimensions (LxWxH): 400 x 124 x 60mm Connection threads: 6x1/4“ Outlet Connection threads: 1x1/4“ Mounting thread size: M3 Pressure tested: 1.5bar Weight:1,756kg Extent of delivery: 1x Radiator 12x Copper-plated M3x30mm hexagon socket screw 12x Copper-plated M3x35mm hexagon socket screw

The new Alphacool NexXxos radiators, a name that stands for experience and quality has come to bring a fresh breeze to the radiator market. Every user of a water cooling system needs a radiator and everyone has different requirements towards the heat exchanger. Of course the customer always demands the best in its class. The Alphacool NexXxos radiators have come to compete with and to beat the best in their class and to be the best radiator in all sizes. No more endless choices without a clear class leader, the Alphacool NexXxos is the one tool for all your needs! Alphacool has been the company to introduce new developments and improvements in the radiator and water cooling sector generally many times over the last years. Following this tradition, the new NexXxos radiators are the first to truly deserve the “Full copper” attribute. All main parts, not only the fins and channels, but the chambers are also made from copper. This brings an improvement in performance where other radiators are left without a chance. The material already gives an advantage over the competition and the inner structure is up to par with the competition. Separated chambers give the coolant a clear direction, allowing high flow rates which improve the performance of the whole cooling loop. Flat chambers on the heat exchanger increase mounting flexibility thanks to the reduced overall length. Versatile and easy mounting is one of the main points, on which the research and development department at Alphacool focused. The chamber offers three possibilities for fitting installation on both inlet and outlet (not on the NexXos ST30). Less angled fittings are needed, improving flow rates and offering more mounting possibilities. Hence the radiator can even be installed in tight enclosures, where otherwise internal installation is not a possibility. A 1/4" screw plug allows easy de-aeration of the radiator (on all UT60 and NexXxos Monsta) and hassle-free vertical installation of the heat exchanger. The threaded opening can even be used for filling, e.g. in combination with a Fillport. Versatility is the essence of the new NexXxos series! The radiators are designed to be used with 120mm as well as 140mm fans and are available in different thicknesses. The choice of 30mm, 45mm and 60mm offers the perfect radiator for every purpose. Even mounting and installation of fans and radiator grills is easy and versatile with these radiators: The M3 threads are standard in the radiator sector and available in all lengths at an affordable price. Even the dreaded insertion of a screw too far into the radiator does not result in expensive damage. Unlike other radiators, the NexXxos series is equipped with an internal protective ledge which stops the screw before it damages the fins. Fin spacing is always an important factor in radiator design. The new series from Alphacool has a fin design which allows it to perform extremely well even with slow-spinning and medium-speed fans. This is not only pleasant thanks to the fact that it avoids unnecessary noise; it also means that the choice of fans that can be used with these radiators is not restricted. These radiators are the result of experience and powerful performance meeting future-oriented design and well-thought through solutions. Alphacool NexXxos radiators: The one tool for all your cooling needs! Technical specifications: Material internal: Mostly copper Material casing: Side panels steel, threads brass, copper chambers Colour: Black Dimensions (LxWxH): 402 x 182 x 45mm Connection threads: 6x1/4“ Mounting thread size: M3 Pressure tested: 1.5bar Weight:1,590kg Extent of delivery: 1x Radiator 8x Copper-plated M3x30mm hexagon socket screw 8x Copper-plated M3x35mm hexagon socket screw

With the new graphics card water block series, Alphacool combines the advantages of developement and research in Germany with affordable production in China. Years of experience in research of developement at Alphacool reflect in high-quality and well-designed water blocks. And the results are spectacular:   Weight: An optimized cooling plate and top structure allowed weight savings of approximately 200 grams, resulting in a 757g leightweight.   Channel structure: Despite the low weight, all relevant heat zones on the graphics card are covered and cooled by the water block. In the chip area, the cooling plate features a channel structure with a remaining thickness of less than 1mm and channels only 0.8mm in width. This allows extreme cooling performance for even the most extreme overclocking.   Flow: Channel- and cooling structure were optimized to achieve maximum flow rates   Material: Highly thermally conductive copper  of high purity is used for the cooling plate, achieving the best possible heat transfer from graphics card to coolant   Compatibility: Thanks to the low depth of only 6mm, conflicts with neighbouring expansion- or graphics cards are a thing of the past. Maximum compatibility for Multi-GPU systems means maximum performance paired with perfect cooling!   SLI ready: With four connection threads, multiple graphics card water blocks can be connected directly with SLI connectors   Design: Alphacool took a new approach to the appearance of this new water block series: Stainless steel top plates in five different finishes give an individual touch to your system. The water block is available in the following finishes: black (brushed / polished), silver (brushed / polished) and polished copper.   Included with this water block are mounting screws as well as thermal pads and -compound. A multi-lingual (German, English, French) mounting manual and tools allow quick and easy installation of the water block.   And the best at the end:  The water block is shipped in vacuum packaging. This allows our customers to be sure that the water block is fresh from the factory and not stained from storage. Another great thing about the new series are the many different availabe versions. The layout of the water block is as shown in the image gallery. Despite that we strongly recommend to hold up the water block against the graphics card before removing the protective film to ensure compatibility. Should the water block actually not fit, you can return the water block to us and will, if the vacuum packaging is unopened, receive a 100% refund!   Technical specifications:  Material: Copper, stainless steel  Dimensions (LxWxH): 185x124x6mm (17mm at the fitting area)  Weight: Approx. 757g  Connection threads: 4x G1/4" completely SLI/Crossfire capable  Compatible with ATI 7970 and 7950 graphics cards in reference layout   Extent of delivery:  1x Water block  Thermal pads  Thermal compound  Mounting material  2x G1/4" screw plugs  Lista kompatybilnosci

Description Special mounting kit with concealed springs for alphacool coolers as well as coolers of external manufacturers The CoolCover mounting kit has two special features: Technically seen it simplifies the setting of the maximal uniform pressure of all four springs. Concerning the Design, the optically unhandsome springs disappear from the viewer´s eye, resulting so a harmonious general view in the midst of the water-cooler. The highest possible contact pressure is reached by adjusting the casing length with the shortest, minimal spring deflection if the spring has completely disappeared in the casing. Thus a complete even pressure distribution is also guaranteed. Due to their special length, the knurled nuts made of massive brass are easily operated by hand. Through a recessed lap joint at the lower end of the knurled nut, a clean and symmetrical connection can be obtained by shifting the casing and knurled nut - engagement snaps into place audibly. The Coolcover is suitable for all alphacool CPU coolers and coolers of other manufacturers. By the accompanying three different screw lengths, different heights can be fitted to the thread depth of the Coolcover - knurled nut adjustment - for each individual case the original connection material can also be suited with coolers from other manufacturers and so obtain the right combination. With the Coolcover high M4 thread depth of maximum 17mm - the knurled nut should allow every possible combination* Practical and safe mounting plate: The mounting plate screws are secured against coincidental release by a high lock nut plus lock washer. As a result of the high design of the screw nut this can be tightened comfortably and firmly by simply using the fingers. The screw is fixed during the assembly of the screw nut by merely using the enclosed hexagonal pin spanner. Thus are void dangerous assemblies with screwdriver and pliers, which could damage the Main board when slipping. *When using other feathers we urge you to consider: spring diameter, casing length/ inner diameter, spring length and minimum spring deflection. Characteristics in the overview: - Knurled nut and casing made of solid brass - Even pressure distribution without technical aids - Use of the shortest, minimal spring deflection - Attractive Design by occlusion of springs - Universally applicable Technical data: Knurled nut internal screw thread: M4, 17mm deep Casing length: 11mm Inner core diameter: 8mm Spring length: 21,2mm Screws and lengths: 4x M4x40, 45 and 50mm Weight: 90 g Dimensions knurled nut (DxH): 9x20mm An Englisch mounting manual can be found here: Scope of supply: Blister Retail packaging,  Instructions and assembly screw set, plastic wearing parts, spring M4 hexagon nut high design, springs, brass knurled nuts and casing

The new Alphacool NexXxos radiators, a name that stands for experience and quality has come to bring a fresh breeze to the radiator market. Every user of a water cooling system needs a radiator and everyone has different requirements towards the heat exchanger. Of course the customer always demands the best in its class. The Alphacool NexXxos radiators have come to compete with and to beat the best in their class and to be the best radiator in all sizes. No more endless choices without a clear class leader, the Alphacool NexXxos is the one tool for all your needs! Alphacool has been the company to introduce new developments and improvements in the radiator and water cooling sector generally many times over the last years. Following this tradition, the new NexXxos radiators are the first to truly deserve the “Full copper” attribute. All main parts, not only the fins and channels, but the chambers are also made from copper. This brings an improvement in performance where other radiators are left without a chance. The material already gives an advantage over the competition and the inner structure is up to par with the competition. Separated chambers give the coolant a clear direction, allowing high flow rates which improve the performance of the whole cooling loop. Flat chambers on the heat exchanger increase mounting flexibility thanks to the reduced overall length. Versatile and easy mounting is one of the main points, on which the research and development department at Alphacool focused. The chamber offers three possibilities for fitting installation on both inlet and outlet (not on the NexXos ST30). Less angled fittings are needed, improving flow rates and offering more mounting possibilities. Hence the radiator can even be installed in tight enclosures, where otherwise internal installation is not a possibility. A 1/4" screw plug allows easy de-aeration of the radiator (on all UT60 and NexXxos Monsta) and hassle-free vertical installation of the heat exchanger. The threaded opening can even be used for filling, e.g. in combination with a Fillport. Versatility is the essence of the new NexXxos series! The radiators are designed to be used with 120mm as well as 140mm fans and are available in different thicknesses. The choice of 30mm, 45mm and 60mm offers the perfect radiator for every purpose. Even mounting and installation of fans and radiator grills is easy and versatile with these radiators: The M3 threads are standard in the radiator sector and available in all lengths at an affordable price. Even the dreaded insertion of a screw too far into the radiator does not result in expensive damage. Unlike other radiators, the NexXxos series is equipped with an internal protective ledge which stops the screw before it damages the fins. Fin spacing is always an important factor in radiator design. The new series from Alphacool has a fin design which allows it to perform extremely well even with slow-spinning and medium-speed fans. This is not only pleasant thanks to the fact that it avoids unnecessary noise; it also means that the choice of fans that can be used with these radiators is not restricted. These radiators are the result of experience and powerful performance meeting future-oriented design and well-thought through solutions. Alphacool NexXxos radiators: The one tool for all your cooling needs! Technical specifications: Material internal: Mostly copper Material casing: Side panels steel, threads brass, copper chambers Colour: Black Dimensions (LxWxH):121,5x82x41mm Connection threads: 2x1/4“ Mounting thread size: M3 Pressure tested: 1.5bar Weight: Technical Drawing: http://www.alphacool.com/download/80-80-45.pdf Extent of delivery: 1x Radiator 4x Copper-plated M3x30mm hexagon socket screw 4x Copper-plated M3x35mm hexagon socket screw